石墨烯的用量对合成异戊橡胶力学性能和电性能的影响

通过对不同含量的石墨烯与异戊橡胶混炼和硫化,制备出了石墨烯补强的新型异戊橡胶复合材料,硫化特性测试表明石墨烯能够增大异戊橡胶的硫化程度,且随着石墨烯含量增多,石墨烯对异戊橡胶硫化的促进效果也会增强,但是石墨烯含量的增多也会导致异戊橡胶焦烧时间t_(10)的下降,影响橡胶混炼过程的安全性。经过拉伸强度和撕裂强度等力学性能测试表明,石墨烯的添加能够同时增大异戊橡胶的拉伸强度和撕裂强度,当异戊橡胶中加入0.5～1.0份石墨烯时,异戊橡胶的综合力学性能最好。电性能测试结果表明,加入2.0份石墨烯,异戊橡胶的电导率提高近1 000倍,达1.87×10~(-7) S/cm,可以制备适应某些领域的抗静电橡胶和导电橡胶。     

离子膜电解反向电流及其消除

探讨反向电流的形成、反向电流的危害、极化整流器消除反向电流的若干方式、C-DCDS装置构成及其与极化整流器匹配应用于电解槽的情况,以及单独使用极化整流器或C-DCDS和两者匹配使用的方法。     

电信运营商信息安全管控架构及集中策略研究

本文对运营商信息安全集中管控架构演进和信息安全管控策略面临的问题进行了深入分析，提出了信息安全集中管控架构的演进方向建议及对信息安全监控策略工作优化的若干意见。     

钚及其裂变产物钯 、银 、镉 、锡 、锑 、锆的系统分离方法

描述了钚及其6种裂变产物钯、银、镉、锡、锑、锆的系统分离方法：在强碱性阴离子交换树脂柱上将盐酸介质的辐照靶溶解液中的这些元素分为5组，然后再针对各组目标元素进行分离和纯化，可简便快速地从同一份靶溶解液中分离以上7种元素。采用辐照铀靶对分离方法进行了验证，结果表明，分离流程对6种裂变产物的化学回收率均大于70%，对γ谱仪测量干扰的主要核素去污因子均大于1.0×10³，可满足²³⁹Pu裂变谷区核素裂变产额测量对化学分离的要求。     

马尔可夫跳变线性系统最优控制的研究现状与进展

马尔可夫跳变线性系统（MJLS）是一种具有多个模态的随机系统，系统在各个模态之间的跳变转移由一组马尔可夫链来决定。MJLS模型因其在表示过程中可以产生突变而更能精确的描述实际工程应用中的系统。近年来，MJLS的最优控制问题成为了研究的热点，动态规划、极大值原理以及线性矩阵不等式等成为了解决此类问题的主流方法。本文对MJLS最优控制领域的研究现状进行了综述。分别对一般情况下、带有噪声的情况下、带有时滞的情况下以及某些特定情况下的MLJS最优控制问题的国内外研究现状进行论述。最后进行了总结并提出MJLS最优控制领域未来值得关注的研究方向。     

A spatio-temporal fusion method for remote sensing data Using a linear injection model and local neighbourhood information

This paper presents a spatio-temporal fusion method for remote sensing images by using a linear injection model and local neighbourhood information. In this method, the linear injection model is first introduced to generate an initial fused image, the spatial details are extracted from the fine-resolution image at the base date, and are weighted by a proper injection gains. Then, the spatial details and the relative spectral information from the coarse-resolution images are blended to generate the fusion result. To further enhance its robustness to the noise, the local neighbourhood information, derived from the fine-resolution image and the fused result simultaneously, is introduced to refine the initial fused image to obtain a more accurate prediction result. The algorithm can effectively capture phenology change or land-cover-type change with minimum input data. Simulated data and two types of real satellite images with seasonal changes and land-cover-type changes are employed to test the performance of the proposed method. Compared with a spatial and temporal adaptive reflectance fusion model (STARFM) and a flexible spatio-temporal fusion algorithm (FSDAF), results show that the proposed approach improves the accuracy of fused images in phenology change area and effectively captures land-cover-type reflectance changes.     

基于小波变换的分数阶微分算法在肝脏肿瘤CT图像纹理增强中的应用

图像纹理增强过程中容易丢失平滑区域纹理细节，而分数阶微分增强虽然能够非线性保留平滑区域纹理细节，但对频率分辨率敏感。针对这个问题，提出一种基于小波变换的分数阶微分纹理增强算法，应用于平扫计算机断层扫描（CT）图像的肝脏肿瘤区域的纹理增强。首先，通过小波变换将图像感兴趣区分解成多个子带分量；其次，基于分数阶微分定义构造一个带补偿参数的分数阶微分掩膜；最后，使用该掩膜与每个高频子带分量进行卷积并利用小波逆变换重组图像感兴趣区。实验结果表明，该方法在使用较大分数阶次显著增强肿瘤区域的高频轮廓信息的同时，有效地保留了低频平滑的纹理细节：增强后的肝细胞癌区域与原区域相比，信息熵平均增加36.56%，平均梯度平均增加321.56%，平均绝对差值平均为9.287；增强后的肝血管瘤区域与原区域相比，信息熵平均增加48.77%，平均梯度平均增加511.26%，平均绝对差值平均为14.097。     

Design and synthesis of side-chain optimized poly(2,6-dimethyl-1,4-phenylene oxide)-g-poly(styrene sulfonic acid) as proton exchange membrane for fuel cell applications: Balancing the water-resistance and the sulfonation degree

Side-chain optimized poly (2,6-dimethyl-1,4-phenylene oxide)-g-poly (styrene sulfonic acid) (PPO-g-PSSA) is designed with balanced water-resistance and sulfonation degree. The PPO-g-PSSA is synthesized by controlled atom-transfer radical polymerization (ATRP) from brominated poly (2,6-dimethyl-1,4-phenylene oxide) (PPO-xBr) and ethyl styrene-4-sulfonate and followed by hydrolysis. A series of PPO-g-PSSA are prepared possessing different bromination degree (x) of PPO-xBr and polymerization degree (m) of the side-chains and the water-resistances of the fabricated membranes are investigated. The results show that a PPO-g-PSSA at relatively low x (x < 0.2) and high m (m > 4) exhibits good balance between the water-resistance and the sulfonation degree. Namely, it displays suitable proton conductivity with compromised water-resistance. Moreover, a maximum ion exchange capacity (IEC) of 3.24 mmol g^?1 is reached without the sacrifice of water-resistance. In addition, PPO-g-0.08PSSA-13 and PPO-g-0.14PSSA-4 are chosen characterized by thermogravimetric analysis, proton conductivities and mechanical properties. At 90% RH, the optimized PPO-g-0.08PPSA-13 possesses a proton conductivity of 37.9 mS cm^?1 at 40 °C and 45.5 mS cm^?1 at 95 °C, respectively.     

Different hydrothermal corrosion results between two sides of sodalime float glass and the possible corrosion mechanism

Sodalime float (SF) glass is widely used in our societies and industries. Hydrothermal corrosion method is one of the effective ways to prepare a superhydrophobic glass, but there is still lack of knowledge about hydrothermal corrosion behavior and mechanism of SF glass. We have hydrothermally treated SF glass at 180 °C for different time, and tried to reveal the aqueous corrosion process of SF glass. We have characterized the morphologies and chemical compositions of samples, and found that (1) the two sides of SF glass have different corrosion resistances, and (2) a multilayer structural coating with a nanoflake layer (Mg-rich gel layer), a nanowire layer (Ca-rich gel layer), and a porous layer (etched layer) is formed on the air-side of SF glass. Based on the experimental results, we have proposed an aqueous corrosion mechanism of SF glass. The insights of the hydrothermal corrosion behaviors and mechanism provide helpful guidelines to glass surface structural control and functionalization.